Flight Log - 2015-02-14 - K Sonesen's BAR Crayon 38mm
This is a modified version of the Bay Area Rocketry 38mm kit. I moved the motor tube 2" aft, added a third centering ring, and an Aeropack retainer. I also used a kevlar y-bridle, 15' of 9/16" tubular nylon, and a KSR 30H chute. All connections are made with 1/4" quicklinks. I added 5 ounces of ballast to the nosecone so that I can launch on I225 motors and similar.
| Flight Date: | 2015-02-14 |
| Rocket Name: | BAR Crayon 38mm |
| Flyer's Name: | K Sonesen |
| Motors: | I212-8 |
| Expected Altitude: | 2,000.00 Feet |
| Wind Speed: | 3.00 mph |
| Launch Site: | LUNAR - Snow Ranch |
This flight went up quite a bit higher than expected. No altimeter on board so I will only say that at apogee the 30" black and white striped chute was just about invisible to me but I could just make out the pink crayon.
| Stage | Motor(s) |
|---|---|
| 1 | CTI 364I212-14A-8 |
Sponsored Ads
 |
 |