Scratch - Pushing the Envelope Scratch

Manufacturer: Scratch
Product Type: Scratch
Reviews
  • Scratch Pushing the Envelope By Brian Kain

    ( Contributed - by Brian Kain) Download RockSim file here ! Brief: My scratch built level 2 rocket. Made for the J-350 but can fly on small 29mm H motors also. Used old phenolic but glassed with 6oz fiberglass and 30 min epoxy. ACME 3/8" lugs, LOC nose cone, G-10 FR4 (fire and heat resistant fiberglass). Radio shack personal body alarm for corn field recoveries. Custom aluminum ...

  • Scratch Pushing the Envelope By Brian Kain

    Pushing The Envelope 38 ( Contributed - by Brian Kain) Download RockSim file here ! Brief: A down scale of my level 2 rocket. TTW to a 29mm MMT. Can fly the I-200 load. If you were crazy you could cert 1 on this rocket with a 29mm H motor. 9400' on the H-90. Construction: 3 38mm body tubes Phenolic 3 1/16" G-10 fins 5 1/8" birch CR's 12" of 29mm ...

  • Scratch Pushing the Envelope By Brian Kain

      I wanted to build a rocket with the smallest fins I could get away with.....So I came up with this. I used Rocsim, VCP and WRASP to get my optimal size fin. Oddly enough, most of the programs agreed with my rocket. This is a single stage rocket, with an interchangeable MMT. Anything from 54mm down to 24mm motors will push this little guy. It uses a PML 30" chute with the shroud ...

Rocksim Design Files

comment Post a Comment