Instructions for Calculating the Picture from Astrocam

1. After running your simulation in Rocksim 8, select the simulation and click on the 2D profile button. (1^st Pic)

Once the simulation reruns and you see the simulated flight profile window, use your mouse or arrow keys to slide the Flight Time slider to just before Rocksim tilts the model perpendicular to the ground. You can also type in the exact time before ejection. (2^nd Pic)

Click on the Details button and scroll down till you see "Flight angle." This is the Deployment Angle. You will see the altitude displayed right of the Flight Time slider. It is important to note that even though the Flight Angle and Range values are negative, you need to enter them in the calculator as a positive value. (3^rd Pic)